- Messages : 119
- Remerciements reçus 3
Résolution de problème : merci de consulter la FAQ et le Wiki
Aidez-nous à améliorer le contenu du Wiki et de la FAQ en les consultant. Le Wiki est mis à jour régulièrement et la FAQ permet une résolution rapide des principales embûches rencontrées. N'hésitez pas à nous faire parvenir vos suggestions d'amélioration sur le forum ou à éditer directement le Wiki ou la FAQ .
Device editing / ETC S4 LED
- Wilf
- Auteur du sujet
- Hors Ligne
- Membre premium
Moins
Plus d'informations
il y a 8 ans 3 mois #11687
par Wilf
Device editing / ETC S4 LED a été créé par Wilf
For a show tomorrow I have to use some ETC fixtures.
They have set them in HSIC-mode and in this mode they have:
Hue - coarse
Hue - fine
Saturation
Intensity
Strobe
Fan Control
Color Point (CCT)
There's also a personality called 'studio' which uses tint.
The personalities aren't allowed to be edited because I'm visiting the venue and don't have the time to change them (and back).
Now I was wondering: I couldn't find hue, saturation, intensity, fan control, color point and tint (yet) in the device editor. Can/should I make these values myself and how should I do it? Should I put them all under "EXTRA" and then change the name of the parameter to the one I'll be using?
They have set them in HSIC-mode and in this mode they have:
Hue - coarse
Hue - fine
Saturation
Intensity
Strobe
Fan Control
Color Point (CCT)
There's also a personality called 'studio' which uses tint.
The personalities aren't allowed to be edited because I'm visiting the venue and don't have the time to change them (and back).
Now I was wondering: I couldn't find hue, saturation, intensity, fan control, color point and tint (yet) in the device editor. Can/should I make these values myself and how should I do it? Should I put them all under "EXTRA" and then change the name of the parameter to the one I'll be using?
Connexion pour participer à la conversation.
- sl1200mk2
- Hors Ligne
- Administrateur
Moins
Plus d'informations
- Messages : 10113
- Remerciements reçus 958
- Wilf
- Auteur du sujet
- Hors Ligne
- Membre premium
Moins
Plus d'informations
- Messages : 119
- Remerciements reçus 3
il y a 8 ans 3 mois - il y a 8 ans 3 mois #11689
par Wilf
Réponse de Wilf sur le sujet Device editing / ETC S4 LED
I think it's the series 1 since it's the Lustre+ (series 2 has no plus if I read it correctly). I have to trust the technical sheet of the venue and the technical data I downloaded on the ETC-site.
I've made a few personalities right now, should I upload them in this topic? I'm not sure I did them correctly.
By the way: I'm now making the personality of Elation ePar QW, 5ch and 6ch.
Now the dimmer curve is divided in steps and I made them with the [ + ] beneath the offset 5 for the 5CH one.
I hoped I could use this one for the 6ch version too but how can I change the offset number? If I now add another offset it is placed beneath the dimmer curve but I need to swap them (offset 5 to 6 and the new one to 5). Is that possible?
I've made a few personalities right now, should I upload them in this topic? I'm not sure I did them correctly.
By the way: I'm now making the personality of Elation ePar QW, 5ch and 6ch.
Now the dimmer curve is divided in steps and I made them with the [ + ] beneath the offset 5 for the 5CH one.
I hoped I could use this one for the 6ch version too but how can I change the offset number? If I now add another offset it is placed beneath the dimmer curve but I need to swap them (offset 5 to 6 and the new one to 5). Is that possible?
Dernière édition: il y a 8 ans 3 mois par Wilf.
Connexion pour participer à la conversation.
- sl1200mk2
- Hors Ligne
- Administrateur
Moins
Plus d'informations
- Messages : 10113
- Remerciements reçus 958
il y a 8 ans 3 mois #11690
par sl1200mk2
nicolas
Réponse de sl1200mk2 sur le sujet Device editing / ETC S4 LED
if so, I would suggest you to set the device in DIRECT mode (10CH):
1 – Red
2 – Lime
3 – Amber
4 – Green
5 – Cyan
6 – Blue
7 – Indigo
8 – Intensity
9 – Strobe
10 – Fan Control
thus, you'll be able to use RGB or CMY colorimetrical system of DL.
for the fan, I would set it as EXTRA attribute
in the b55, I've allowed more atributes/parameters to be user defined... but for the b54, only COLOURS and EXTRA can have user defined parameters.
++
1 – Red
2 – Lime
3 – Amber
4 – Green
5 – Cyan
6 – Blue
7 – Indigo
8 – Intensity
9 – Strobe
10 – Fan Control
thus, you'll be able to use RGB or CMY colorimetrical system of DL.
for the fan, I would set it as EXTRA attribute
in the b55, I've allowed more atributes/parameters to be user defined... but for the b54, only COLOURS and EXTRA can have user defined parameters.
++
nicolas
Connexion pour participer à la conversation.
- sl1200mk2
- Hors Ligne
- Administrateur
Moins
Plus d'informations
- Messages : 10113
- Remerciements reçus 958
il y a 8 ans 3 mois #11691
par sl1200mk2
nicolas
Réponse de sl1200mk2 sur le sujet Device editing / ETC S4 LED
sorry, I wrote for the lustr2...
nicolas
Connexion pour participer à la conversation.
- sl1200mk2
- Hors Ligne
- Administrateur
Moins
Plus d'informations
- Messages : 10113
- Remerciements reçus 958
il y a 8 ans 3 mois #11692
par sl1200mk2
nicolas
Réponse de sl1200mk2 sur le sujet Device editing / ETC S4 LED
but for the lustr+v (serie 1) DMX chart looks the same...
can you post the personality you've made in order to clarify the dimmer point?
++
can you post the personality you've made in order to clarify the dimmer point?
++
nicolas
Connexion pour participer à la conversation.
Temps de génération de la page : 0.392 secondes